Changsha Parts Sea Co., Ltd. | info@partssea.com
 |
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
1. The cable is wrapped around the cable box and gets stuck.
2. The coil spring inside the cable box is broken.
3. Check the drive motor of the drum to see if there is poor contact in the power supply. Running the motor single will cause insufficient power. Check to see if the motor is working normally.
1. The cable box cannot work
When the cable pull box fails to work, the following fault reasons may exist:
1. Power failure: Check whether the battery and fuse are normal.
2. Coupling wear: Check the wear of the coupling and replace it in time if there is any wear.
3. Relay failure: Check the connection of the relay and replace it in time if abnormal.
2. The cable box cannot be stopped
When the crane cable box cannot be stopped, the following fault reasons may exist:
1. The spring reeds inside the wire box are aging: Check whether the spring reeds are aging, and replace them in time if they are.
2. Coil failure: Check whether the coil is normal and replace it in time if abnormal.
3. Motor failure: Check whether the motor is normal and replace it in time if there is any failure.
3. The output power of the crane cable box is too small
When the output power of the crane cable box is too small, the following fault causes may exist:
1. Insufficient battery power: Check whether the battery is sufficient. If it is insufficient, charge it in time.
2. Large friction resistance: Check whether the transmission part is smooth. If there is resistance, repair it in time.
3. Motor damage: Check whether the motor is normal and replace it in time if it is damaged.
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
1. The cable is wrapped around the cable box and gets stuck.
2. The coil spring inside the cable box is broken.
3. Check the drive motor of the drum to see if there is poor contact in the power supply. Running the motor single will cause insufficient power. Check to see if the motor is working normally.
1. The cable box cannot work
When the cable pull box fails to work, the following fault reasons may exist:
1. Power failure: Check whether the battery and fuse are normal.
2. Coupling wear: Check the wear of the coupling and replace it in time if there is any wear.
3. Relay failure: Check the connection of the relay and replace it in time if abnormal.
2. The cable box cannot be stopped
When the crane cable box cannot be stopped, the following fault reasons may exist:
1. The spring reeds inside the wire box are aging: Check whether the spring reeds are aging, and replace them in time if they are.
2. Coil failure: Check whether the coil is normal and replace it in time if abnormal.
3. Motor failure: Check whether the motor is normal and replace it in time if there is any failure.
3. The output power of the crane cable box is too small
When the output power of the crane cable box is too small, the following fault causes may exist:
1. Insufficient battery power: Check whether the battery is sufficient. If it is insufficient, charge it in time.
2. Large friction resistance: Check whether the transmission part is smooth. If there is resistance, repair it in time.
3. Motor damage: Check whether the motor is normal and replace it in time if it is damaged.