Changsha Parts Sea Co., Ltd. | info@partssea.com
 |
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
Excavator quick connector, also called quick change joint and quick connector. The quick connector can quickly install and switch various configuration parts (bucket, ripper, breaker, hydraulic shear, etc.) on the excavator, which can expand the scope of use of the excavator, save time, and improve work efficiency.
1. Use high-strength materials; suitable for various models of 3-80 tons;
2. Use the safety device of the hydraulic control one-way valve to ensure safety;
3. The excavator configuration parts do not need to be modified, and they can be replaced without removing the pins, so they can be installed quickly and can greatly improve work efficiency.
4. There is no need to manually smash the bucket pin between the breaker and the bucket. The exchange between the bucket and the breaker can be completed by gently moving the switch for ten seconds, which saves time, effort, simplicity and convenience.
5. It is mainly used in workplaces where the front-end working device of the excavator needs to be frequently replaced. It does not need to be installed when using one device for a long time.
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
Excavator quick connector, also called quick change joint and quick connector. The quick connector can quickly install and switch various configuration parts (bucket, ripper, breaker, hydraulic shear, etc.) on the excavator, which can expand the scope of use of the excavator, save time, and improve work efficiency.
1. Use high-strength materials; suitable for various models of 3-80 tons;
2. Use the safety device of the hydraulic control one-way valve to ensure safety;
3. The excavator configuration parts do not need to be modified, and they can be replaced without removing the pins, so they can be installed quickly and can greatly improve work efficiency.
4. There is no need to manually smash the bucket pin between the breaker and the bucket. The exchange between the bucket and the breaker can be completed by gently moving the switch for ten seconds, which saves time, effort, simplicity and convenience.
5. It is mainly used in workplaces where the front-end working device of the excavator needs to be frequently replaced. It does not need to be installed when using one device for a long time.