Changsha Parts Sea Co., Ltd. | info@partssea.com
 |
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
1. Check the appearance of the water pump
First, check the water pump for obvious damage or leaks. If you find that the water pump is leaking, corroded, etc., it is likely that there is a problem with the water pump.
2. Check the water pump bearings
You can determine whether the water pump is operating normally by checking whether the water pump bearings are loose or damaged. If the water pump bearing is damaged or loose, it will cause the water pump to operate abnormally and even make noise. It should be noted that this method requires professionals to replace it.
3. Check whether the coolant is circulating
If you find that the excavator coolant is not circulating, it is most likely caused by the water pump not working. You can tell by observing whether the coolant is flowing and the water temperature gauge reading.
4. Open the radiator cover and check the water temperature
If you find that the water temperature on the radiator cover is higher than the normal range, it is likely that there is a problem with the water pump. At this time, you need to check whether the water pump is working properly.
The above methods can be used to determine whether the excavator engine water pump is broken. If it is confirmed that there is a problem with the water pump, it should be replaced or repaired in time to avoid causing greater losses to the excavator.
[conclusion]
This article introduces how to determine whether the excavator engine water pump is broken. I hope it will be helpful to everyone. It should be noted that if you do not have professional knowledge and tools, it is best not to try to replace the water pump yourself to avoid causing greater losses. It is recommended to choose a professional excavator maintenance organization for inspection and maintenance.
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
1. Check the appearance of the water pump
First, check the water pump for obvious damage or leaks. If you find that the water pump is leaking, corroded, etc., it is likely that there is a problem with the water pump.
2. Check the water pump bearings
You can determine whether the water pump is operating normally by checking whether the water pump bearings are loose or damaged. If the water pump bearing is damaged or loose, it will cause the water pump to operate abnormally and even make noise. It should be noted that this method requires professionals to replace it.
3. Check whether the coolant is circulating
If you find that the excavator coolant is not circulating, it is most likely caused by the water pump not working. You can tell by observing whether the coolant is flowing and the water temperature gauge reading.
4. Open the radiator cover and check the water temperature
If you find that the water temperature on the radiator cover is higher than the normal range, it is likely that there is a problem with the water pump. At this time, you need to check whether the water pump is working properly.
The above methods can be used to determine whether the excavator engine water pump is broken. If it is confirmed that there is a problem with the water pump, it should be replaced or repaired in time to avoid causing greater losses to the excavator.
[conclusion]
This article introduces how to determine whether the excavator engine water pump is broken. I hope it will be helpful to everyone. It should be noted that if you do not have professional knowledge and tools, it is best not to try to replace the water pump yourself to avoid causing greater losses. It is recommended to choose a professional excavator maintenance organization for inspection and maintenance.