Changsha Parts Sea Co., Ltd. | info@partssea.com
 |
| Quantity: | |
|---|---|
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
Excavator bucket teeth are an important part of the excavator. They are similar to human teeth and are also wearing parts. They are a combination bucket tooth composed of a tooth base and a tooth tip, and the two are connected by a pin. Since the worn and failed part of the bucket teeth is the tooth tip, only the tooth tip can be replaced. The most popular excavators on the market are: Carter, Komatsu, Hitachi, Daewoo, Kobelco, Hyundai, etc. Commonly used domestic excavators include: XCMG, Yuchai, Shanggong, Sany, Lingong, Shantui, Foton Lovol, Liugong, XCMG, Lonking, Sunward, Zoomlion, etc.
A standard bucket generally has five teeth and is suitable for excavation and loading of earth and stone such as clay and sand. A rock bucket, as the name suggests, is a machine used to excavate and load stones such as rocks and sub-hard rocks, and can be widely used in mines and quarries. and other harsh environments; the mud bucket is used to clean up the silt in ditches and rivers. It has no bucket teeth and is wide; the bucket teeth of the soil loosening bucket are very sharp, usually three teeth, which are easy to break the soil and are suitable for frozen soil, hard soil, Carry out loosening and excavation of geological materials such as stone mines.
The bucket tooth is the terminal end of the excavator's working device. During the excavation operation, the bucket tooth is the working component with the largest load and is a consumable easy demage part. Especially in the stone construction environment, the bucket tooth wears out very quickly. The use condition of the bucket teeth can actually directly affect the working efficiency and production cost of the excavator. When the tip portion of the bucket teeth is severely worn, the force required for the excavator to cut in during excavation operations will inevitably increase greatly, resulting in greater fuel consumption and affecting work efficiency. Therefore, when it is detected that the bucket teeth are severely damaged, it is very necessary to replace the bucket teeth with new ones in time. How to perform routine inspections on bucket teeth? The bucket body is subject to wear and tear and whether there are cracks. If the wear is severe, reinforcement should be considered. If there are cracks in the bucket body, welding repairs should be carried out in time to avoid increasing the length of the cracks due to delayed repairs and making maintenance impossible. In addition, kick the bucket teeth with your feet to check whether the bucket teeth are stable. If the bucket teeth are loose, they should be tightened immediately.
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
Excavator bucket teeth are an important part of the excavator. They are similar to human teeth and are also wearing parts. They are a combination bucket tooth composed of a tooth base and a tooth tip, and the two are connected by a pin. Since the worn and failed part of the bucket teeth is the tooth tip, only the tooth tip can be replaced. The most popular excavators on the market are: Carter, Komatsu, Hitachi, Daewoo, Kobelco, Hyundai, etc. Commonly used domestic excavators include: XCMG, Yuchai, Shanggong, Sany, Lingong, Shantui, Foton Lovol, Liugong, XCMG, Lonking, Sunward, Zoomlion, etc.
A standard bucket generally has five teeth and is suitable for excavation and loading of earth and stone such as clay and sand. A rock bucket, as the name suggests, is a machine used to excavate and load stones such as rocks and sub-hard rocks, and can be widely used in mines and quarries. and other harsh environments; the mud bucket is used to clean up the silt in ditches and rivers. It has no bucket teeth and is wide; the bucket teeth of the soil loosening bucket are very sharp, usually three teeth, which are easy to break the soil and are suitable for frozen soil, hard soil, Carry out loosening and excavation of geological materials such as stone mines.
The bucket tooth is the terminal end of the excavator's working device. During the excavation operation, the bucket tooth is the working component with the largest load and is a consumable easy demage part. Especially in the stone construction environment, the bucket tooth wears out very quickly. The use condition of the bucket teeth can actually directly affect the working efficiency and production cost of the excavator. When the tip portion of the bucket teeth is severely worn, the force required for the excavator to cut in during excavation operations will inevitably increase greatly, resulting in greater fuel consumption and affecting work efficiency. Therefore, when it is detected that the bucket teeth are severely damaged, it is very necessary to replace the bucket teeth with new ones in time. How to perform routine inspections on bucket teeth? The bucket body is subject to wear and tear and whether there are cracks. If the wear is severe, reinforcement should be considered. If there are cracks in the bucket body, welding repairs should be carried out in time to avoid increasing the length of the cracks due to delayed repairs and making maintenance impossible. In addition, kick the bucket teeth with your feet to check whether the bucket teeth are stable. If the bucket teeth are loose, they should be tightened immediately.