Changsha Parts Sea Co., Ltd. | info@partssea.com
 |
| Quantity: | |
|---|---|
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
The crane cable reel box includes a length measurement component, an angle measurement component and a CAN conversion circuit board. Its internal structure generally includes the following parts:
1. Reel: the core part of the cable puller, used for winding the cable. The reel is usually made of metal and has sufficient strength and durability
2. Driving device: used to drive the drum to rotate so that the cable can be wound or released. The driving device can be manual, such as a hand crank, or electric, such as a motor
3. Brake device: used to control the rotation speed of the drum and stop the movement of the drum. The braking device can be manual, operated by a handbrake, or automatic, adjusting automatically according to the tension of the cable.
4. Tension control device: used to monitor and control the tension of the wire to ensure that the wire is not too tight or too loose during the winding process. Tension control devices can be implemented mechanically or electronically
5. Guide device: used to guide the cable in and out, ensure that the cable can be wound smoothly on the drum, and prevent the cable from being entangled or knotted.
6. Shell: The shell of the cable puller is used to protect the internal structure and the safety of the operator. The casing is usually made of metal or plastic and has sufficient strength and durability.
7. Other accessories: Depending on specific needs, the cable puller may also be equipped with other accessories, such as counters, cable guide wheels, etc.
Please feel free to contactus Parts Sea engineers or sales for help if you have no parts No.
tse@partssea.com | sales@partssea.com
The crane cable reel box includes a length measurement component, an angle measurement component and a CAN conversion circuit board. Its internal structure generally includes the following parts:
1. Reel: the core part of the cable puller, used for winding the cable. The reel is usually made of metal and has sufficient strength and durability
2. Driving device: used to drive the drum to rotate so that the cable can be wound or released. The driving device can be manual, such as a hand crank, or electric, such as a motor
3. Brake device: used to control the rotation speed of the drum and stop the movement of the drum. The braking device can be manual, operated by a handbrake, or automatic, adjusting automatically according to the tension of the cable.
4. Tension control device: used to monitor and control the tension of the wire to ensure that the wire is not too tight or too loose during the winding process. Tension control devices can be implemented mechanically or electronically
5. Guide device: used to guide the cable in and out, ensure that the cable can be wound smoothly on the drum, and prevent the cable from being entangled or knotted.
6. Shell: The shell of the cable puller is used to protect the internal structure and the safety of the operator. The casing is usually made of metal or plastic and has sufficient strength and durability.
7. Other accessories: Depending on specific needs, the cable puller may also be equipped with other accessories, such as counters, cable guide wheels, etc.